How to use our cycle hangars

1. If the lock cover is closed, slide it to your right to open it and reveal the lock
2. Insert your key into the lock and turn the key
3. Remove your key and turn the handle clockwise until it stops in a horizontal position
4. Pull the black handle situated below the handle with the lock to open the door
5. Step back and allow the door of the hangar to open fully

1. Put your bike on to the rack in your designated space that was given to you in your cycle hangar subscription confirmation (they are labelled A,B,C,D,E)
2. Please park your bicycle with the handle bars the opposite way round to the bikes next to your space if possible
3. There are 2 locking points on each rack, and you are recommended to use both with 2 different high-quality locks. Lock the bike through each wheel, locking point and frame at both points.

Take care when leaving the hangar. You may be taller than the height of the door when it’s fully open.

1. Push the hangar door closed, you may wish to use the foot plate on the outside of the hangar, at the bottom of the hangar door to push it properly closed with your foot
2. Hold the door down with the black handle situated below the handle with the lock
3. Turn the lock handle anti clockwise and push it back into its original position
4. Push the handle in until it clicks
5. Close the lock cover